4 oz. bottle Graphite is an awesome lubricant to use at high temperatures. Molybdenum disulfide is a metallic compound that increases the lubricating property of graphite. The particles of molybdenum disulfide act as microscopic "ball bearings", and keep the graphite spread out for even lubrication. Instructions: This bottle should last the average blacksmith more than a year. Add contents of bottle with a bottle of water in a sealed container. Makes 1 pint. Stir well then dip the tooling. Remember that a little goes a long way. MSDS available on request.

Strong enough for a power Hammer, Specially formulated for a press! This is a specially formulated, hand-mixed Top Secret forging lubricant that has been used in the tool making shops at Big BLU for years. It is pre-mixed and ready to use in any application where you need reduced tractionability of your dies. It will ease strain on your machine, make your forging cleaner, and keep your dies from wearing under extreme pressure. Instructions: Apply a thin coating to your dies once they are warm. This can be done every heat or once every few heats as needed. This calcium-based lubricant is safe to spray, but can also be brushed on the dies, and dies can be submerged in it (provided that tool can be quenched). As an added bonus, this BLU Lubricant is BLUE! And it will turn your dies blue as long as they are not over 450 degrees. If they are too hot the lubricant will turn brown. This can be used to indicate whether or not those dies are over heated.

Tenon Maker "Monkey Tool" List:

- 3 Piece Tenon Maker "Monkey Tool"

- 1/2" Tenon Maker "Monkey Tool"

- 1/4" Tenon Maker "Monkey Tool"

- 3/8" Tenon Maker "Monkey Tool"

Slitting Punch and Drift 3 Pc. Set

- 1" Slitting Punch and Drift 3 Pc. Set

- 1/2" Slitting Punch and Drift 3 Pc. Set

- 3/4" Slitting Punch and Drift 3 Pc. Set

- 5/8" Slitting Punch and Drift 3 Pc. Set

- 3/8" Slitting Punch and Drift 3 Pc. Set

Made of forged tool steel, this set of 4 square drifts is made by blacksmiths to be used by blacksmiths. We recommend using our Puncheize punching lubricant with these tools for best performance. This set contains a 3/8", 1/2", 5/8", and 3/4" slitter punch. NOTE: Does not contain Fullering Tool Tongs, you can find the 7/8" Tongs here - https://secure.bigbluhammer.com/coreapp/hand-tools/tongs/tong-singles

Custom forged set of tools designed to be held with punch tongs. To be used by hand or with a power hammer. This set contains: • 1/4" Punch made with S7 steel • 3/8" Punch made with S7 steel • 1/2" Punch made with S7 steel • 1/4" to 1" Stretcher Punch made with S7 steel NOTE: Does not contain Fullering Tool Tongs, you can find the 7/8" Tongs here - https://secure.bigbluhammer.com/coreapp/hand-tools/tongs/tong-singles

Custom forged set of tools designed to be held with punch tongs provided. This kit includes: 1 Mushroom tool- Made of 4140 Tool Steel

4 Round Ball Fullers- Made of 4140 Tool Steel

3 Straight Peen Fullers- Made of 4140 Tool Steel

1 Center Punch- Made of S7 Tool Steel

1 Hot Cutter- Made of S7 Tool Steel

1 Wooden Holding Block

1 Pair of Fitted Tongs

Forged from Tool Steel. To be used by hand or with a power hammer.